Cancel search

Printing on Kemi Corrugated Board

HP Latex R2000 Printer

#1 david6181 3 years ago

Noticed fingerprints on the finished board. Using a HP Latex 2000R. When you swipe your finger against the board it appears like the sheen is being wiped away.

Any suggestions?

Thanks David

#2 HP-Sonia 3 years ago

Hello @david6181

When printing Corrugated Board, follow the next recommendations:

• When handling samples, we recommend wearing protective gloves. The use of gloves prevents from leaving fingermarks and also from accidentally scratching the sample with rings.

• Handle samples with care, avoid hitting samples against corners or sharp edges. Printed samples are not scratch-resistant to keys, knives, cutters or other objects with sharp and hard edges.

• Scratches made on the board prior to printing will still be visible after. Do a visual inspection before printing.

• We recommend storing samples in a vertical position with a protective layer between samples.

• Protect samples when transporting them. Avoid contact and relative movement between boards to prevent scratching.

I hope these good practices help.

Was this helpful?Yes0 No0
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

To make recommendations or participate please Sign In and post a message.

Latest conversations HP Latex


HP Latex Blog


How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.