Error code 47.5:11

I keep getting error code 47.5:11 on printer start up. How do i fix it?

#1 47.05:11 – Ink leak detected in the 3 Liter Ink Upgrade Kit tray Problem description: The printer has detected an ink leak in the 3 Liter Ink Upgrade Kit tray. Corrective action:Service engineer: Replace the leaky part (ink cartridge or ink line). Clean the 3 Liter Ink Upgrade Kit tray. Clean the ink leakage sensor and also the other affected parts. In some cases, cleaning the sensor is not enough to recover the machine. In that case, change the ink leakage sensor.

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

The actions mentioned on #2 have to be taken by an HP Service Engineer. @james.nixon6692 call HP support to deal with the issue.

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

Thanks, working fine now

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

i clean the ink tray ,but same error is coming again ......

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

Error 47.5:11 checking starts with the leak sensor on the bottom of the stand on which 3L ink bags are. It is in the right hand corner, need to disconnect ink cartridges and remove metal panel. This gets shorted by debri and water easily especially after moving printer around or relocating. Good luck.

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

#2 said Clean the 3 Liter Ink Upgrade Kit tray Thank you.

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel