Optimiser issue

HP l360 Having issues with wide range of media. I have "wet " spots on my prints happens at random. and when it starts it doesnt stop on that media. Have a spot of oil like on the print, and when lightly rubbed the print scratches off. This issue is happening on wide range of media from the supe expensive to the cost effective. Using the right profiles and settings. and it doesnt happen always. I printed about 15M of poster on that media no issues then all the sudden it started to happen. and after 6 reprints I finally gave up. all inks wasted plus material and most important time. Support is next to none for these issues. This printer is proven to be a "wrong buy" each day, silly issues that no one seem to be willing to resolve. These issues will make us think twice before buying any HP products again, specially when we spent over 120k for this brand last year.

Hello @EZFX Can you share some pictures? So it will be easier to give you an appropriate answer.

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

Good afternoon, Your issue may not be optimizer at all. When the oily spots appear do you see the following: Oval in shape in a vertical position? Do the register as in when they appaer, do they appear in the exact same spot such as 24" in from the left? If this is the case - it may not be at all - but if it is, you have a heat module issue.

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel