Cancel search

Single Dark Vertical Line on 370 Prints

#1 danielle7975 3 years ago

Hello,

I am getting a single dark line through all my prints on our 370 Latex. (see picture). I have used different rolls of material, done a printhead clean and alignment, cleaned the rod and the sensor code, did a printhead test plot and changed out a head that had missing lines and I continue to get this single line. Unlike 'vertical banding" it is just a single line down the middle. Any ideas what would cause this or how to fix it?

Attachments
   IMG_5342.JPG
   IMG_5343.JPG
#2 gpojerkov 3 years ago

ONCE WE HAD A SIMILAR ISSUE AND WAS A TEMPERATURE ISSUE, CHECK WITH A OTHER MEDIA PROFILE (SORRY MY ENGLISH IS NOT GOOD SHAPE)

Was this helpful?Yes1 No0
100% of users thought this content was helpful.
How can we improve it?
#3 HP Daniela Ciolompea 3 years ago

Hi @danielle7975,

The issue seems to be related to a bad preset configuration. It depends if you are using a generic one or if you are using a custom one. I would recommend changing the settings and comparing it to the generic one. In case you are using a generic preset, it can be that some parts of the printer could be dirty. I hope this helps.

Was this helpful?Yes1 No0
100% of users thought this content was helpful.
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

New comments are not available at this time

Latest conversations HP Latex

Loading...

HP Latex Blog

Loading...

How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.