Cancel search

HP Cutter 64 & Magnets

#1 brian.jackson6927 4 years ago

Anyone offer any tips/advice on cutting magnetics with the HP 64 cutter? Is it even possible?

#2 HP Daniela Ciolompea 4 years ago

Hi @brian.jackson6927,

It is important to check if the Magnets Media is certified for HP Cutter.

Here are the Specs for cutting:

Cut force 0 to 400 grams of downforce, in 5-gram steps Cut thickness 0.05 to 0.25 mm (0.002 to 0.01 in); 0.8 mm (0.03 in) with optional sandblast blade

It's not possible to cut any magnetic that is outside of that range of thickness.

Try to donwload a media profile adapted for your Magnets Media, otherwise you might need to contact HP Support.

Was this helpful?Yes0 No0
How can we improve it?
#3 brian.jackson6927 4 years ago

Thank you. Yes, the media is HP certified - just checked on the HP site. Good to know about the sandblast blade. Much appreciated.

I hope one day I am able to help someone like you have helped me.

Was this helpful?Yes0 No0
How can we improve it?
#4 GCPS 11 months ago

Hi , I find the cutter doesnt read the bar code when substrate is applied to the magnet prior to cut. The magnet also moves during the process 0.6mm Any feedback?

Was this helpful?Yes0 No0
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

New comments are not available at this time

Latest conversations HP Latex

Loading...

HP Latex Blog

Loading...

How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.