2 Latex 360 with different colors

Hi! I recently got 2 latex 360 printers in November 2014. In the first 2 months the colors among the 2 plotters was similar. But now i have to change 2 printheads of one of them and the colors aren't similar now. How can I make the plotters print the same colors. I'm using Ri J45 Ritrama self adhesive, the *.oms file is downloaded directly from the panel printer. And the parameters are exactly the same. Thanks for your help

You didn't mention it but certainly you did an new color calibration of your media after the printhead change, didn't you?

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

You're right. I have done color calibration in both plotters. Btw my rip is Color Gate Production Server 9

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

Are you doing the color calibration from the RIP or from the front panel of the machine? I will recommend you to do it from the front panel from the machine following the instructions of this video: Improving Color Consistency with HP Latex 300 Series Minute 3:36 Let me know if this works.

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

Hi! I've tried to do this but the results were no satisfactory. i follow step by step all the instructions on HP video, but at the end still have a difference between the plotters, is there anything i could do?? One plotter is printing more dark colors than the other. Thanks!

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

Most likely the spectros are not generating the same output in your L360s. I would complain about that and make them replace the one that is not accurate. Is one of them printing accurate?

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

You mentioned that this happened after you changed 2 printheads in one of the units. Could it be that if you replace the same 2 printheads in the other unit that you will see the same results? Roy Kuzmich

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

To get a color matching between both printers, our engineers recommend to follow the steps from the videos, since that's the proper way to do it. however, make sure that printheads are aligned before any color calibration is performed (mostly when generating the A reference), an alignment issue can be cause of color deviation. Alignment+color calibration should return the unit back to the color reference.

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel