What was your overall satisfaction with LKC?
-
Very unsatisfied
-
1
-
2
-
3
-
4
-
5
-
Very satisfied
@JSMI Regarding your inquiry: Trying to print on Fisher Textiles TriPoplin. Any advice for avoiding head crashes Heat settings are at 120 F for printing, and 194 F for curing. Printing at 14 pass 150 density. Here is my recommendation: Make sure you are using this substrate preset: https://www.printos.com/ml/#/medialocator/128186. It seems that you are not using this specific OMS.