Cancel search

HP Cutter depth issue

#1 rackandplume9576 2 years ago

Even with the Force set to 0 grams, its cutting all the way through material. I did not mess with the blade holder from the previous day.

Ive check the blade holder and it looks correct.

#2 2 years ago

I'm new to the HP Latex Print and Cut Solution and I have the same problem. Trying to figure out how to set cut settings. Please let me know if you find a solution. Thanks!

Was this helpful?Yes0 No0
How can we improve it?
#3 HP Daniela Ciolompea 2 years ago


Without knowing which model you are referring to, here are the instructions for the HP Cutter Plus series:

Unable to change cutting pressure

When changing cutting pressure and the cutting depth does not change, then most likely FlexCut mode has been activated. Disable FlexCut to solve the issue. FlexCut is to be activated by the software driving the machine.

Click Menu > FlexCut > FlexCut mode and set to OFF

Also, I suggest checking if the knife is placed correctly.

I hope it helps.

Was this helpful?Yes0 No0
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

To make recommendations or participate please Sign In and post a message.

Latest conversations HP Latex


HP Latex Blog


How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.