HP Latex 360 waves in cyan

#1 inverness7895 4 years ago

Hi there people. It's my first time around here and i'm for some help with this issues. We've printing this textile vinyl for a few days with always the same problems. Some little waves in the cyan part of the print and the final printing has some sort of white dots everywhere. There's a photo attached so you can see it. We've changed the vinyl profile, number of pass, vacuum, curing temperature, etc. and all the same. Any ideas? And of course any info you may need pls ask. Thanks a lot!

Attachments

20210217_223241.jpg

#2 HP Daniela Ciolompea 4 years ago

Hi @inverness7895, There are a few factors to consider in this case. You can rec. using a GENERIC TEXTILE PROFILE (instead of a vinyl profile) to see if there is an improvement Another point is to increase or decrease the OPTIMIZER values. You can find the details on page 118 of this manual: http://h10032.www1.hp.com/ctg/Manual/c05269091.pdf You can also try to use the ink collector (in case you are not using it already). I hope this helps.

Was this helpful?