L25500 Problem

I was printing on some heat tranfer vinly and the carriage hit the vinyl. The carriage then stuck on top of the maintence station. It didn't rip the vinyl and I can't see any under the carriage. Any suggestion on how to get carriage to move? It's locked and I can't get to the screws to remove the service station under it. Thanks in advance. Solved! Go to Solution.

Hi grafix1, Looks to me like something could be broken and it's blocking the carriage. I would suggest you to contact your support source in order to check the printer.

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

I can't find anything broken. The carriage is fine. The printhead cleaning cartridge is not moving far enough forward and the carriage is hitting it. I have tried a cleaning cartridge, still the same problem.

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

Hi grafix1, Have you been able to move the carriage? What was the problem?

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel