Cancel search

L330 - Fogging up of Room when using Scrim Banner

HP Latex 330 Printer

#1 Roy_Kuzmich 7 years ago

Hi All,

This is a first for me. I hope someone has some insight into this.

The client called me and said that his print shop (small store front type)

fogs up when the HP DJ L330 is running, printing on Scrim Banner.

He's had the unit for about a month - I think this is the 1st long run. .

4ft x 20ft banner and they had to open the door to help cleaer the air

No Odor, No burning smell, no smoke - just windows and air fogging up.

We believe that the temp. might be too high and there is some media coating burn off. NOT sure???

Has anyone else seen this?

Roy K

#2 HP-Sonia 7 years ago

Hello @Roy_Kuzmich

It could be a temperature problem, and the air fogging up could be vapor. You can suggest this post :Latex 300 Printer Series Site Preparation Guide it will help your client to understand better how to set up the the work site.

However, maybe your client is using an OMS which uses a huge amount of ink and works faster than the expected, then all those factors join it might cause an aggressive impact into the environment, therefore Vapors.

Our recommendations are trying to modify the OMS (reducing ink density, reducing the curing temperature, increasing the delay between passes…)

Was this helpful?Yes0 No0
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

New comments are not available at this time

Latest conversations HP Latex

Loading...

HP Latex Blog

Loading...

How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.