How likely are you to recommend HP Large Format Knowledge Center to a colleague?
-
Not at all likely
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
Extremely likely
With the L360 when I take a close look at the test prints with a gray border and could see that the gray was not consistent from the start of the print to the end of the test print. Maybe best to replace the lc/ mc head, and I am thinking that I should replace the other heads as well before doing a round of profiling even though the nozzle checks look good. C/B heads have over 5000ml through them and one Y/M and the lc/lm head has over 4000ml. Seams the L25500 was much quickier to tell me heads needed replaced.
What kind of head life are others seeing on these machines, and if there a recommended print life on the L360 heads?