Cancel search

Print/Profile build troubleshooting

#1 printing7206 4 years ago

We recently acquired an HP Latex 335. We have been trying to get profiles build for it to print in the GRACoL gamut. We have 2 370's that are working ok. However we are struggling to get this 335 up to speed. Looking for some suggestions and advice. When i do the image quality printout from the printer we are getting some odd anomalies (Please see attached photos) In two of the photos you can see a line going across in all the alignment images. In the 3rd photo you can see 2 printouts one on the right is from our good working 370 and the left is from the 335. notice the blue tint and also the cyan head seems to be acting up. these are all new heads with less then 1000ml of ink through them. any advice as to whats going on or how to remedy would be greatly appreciated.


The opinions expressed above are the personal opinions of the authors, not of HP.

New comments are not available at this time

Latest conversations HP Latex


HP Latex Blog


How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.