Cancel search

Stained Glass Effect

#1 louisehwright9978 2 years ago

Hi, We have been asked by our client to print some office manifestation with a "stained glass effect" so therefore the ink appears vibrant and quite dense. We know that this can be achieved with a solvent printer but sadly we only have our HP Latex 360! We have tried a backlit film profile on clear vinyl with increased passes but we are not achieving the density of ink. Suggestions much appreciated!


#2 HP Daniela Ciolompea 2 years ago

Hi @louisehwright9978,

I recommend creating a print mode with a low ink saturation and decreasing passes. The backlit film and clear film have a high saturation of ink so try to create this as SAV (Not clear) or through another family media. Creating new print mode choosing the print mode and ink saturation.

Was this helpful?Yes0 No0
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

New comments are not available at this time

Latest conversations HP Latex


HP Latex Blog


How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.