How likely are you to recommend HP Large Format Knowledge Center to a colleague?
-
Not at all likely
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
Extremely likely
We are utilizing Caldera to print on the size of an HP 365. We are requesting multiple jobs that will print the all-inclusive paper roll (165') of paper. We use the nesting feature of Caldera. The first nest is smooth (96"
. Then, in the second nest of the number 96", The printer ceases to function printing after 24"-ish inches. I see the following error message on the LCD of the printer "Error - 63:05; the job ended due to insufficient data received through the RIP. If the problem continues, you should verify the configuration in your RIP system."
I talked to Caldera, and they advised that we first rip the job, then send this to the printer. We've attempted "RIP after which Print"; however, it's not making any difference. We'll try setting"RIP" to determine if this improves the results.
Are there any other ideas?
Caldera Version 11 Current firmware is up to date Firmware version: NEXUS_03_10_03.1 Solved! Go to Solution. Here is the URL checkout and solve it.