Cancel search

For HP latex 375

#1 ye.mdy926604 4 years ago

I have printed on HP latex 375. I appear bad Quality on right side of the media. Good on left side of midea. pls solve this for me.

#2 kelvin.ng5186 4 years ago

#1 hi, can you please specify what your problem? ink not cure? grainy? are you service engineer from golden hero?

Was this helpful?Yes0 No0
How can we improve it?
#3 ye.mdy926604 4 years ago

I have printed on 64 inches of adhesive vinyl. Any image is good in left side of media. Pls see my attache photo

Was this helpful?Yes0 No0
How can we improve it?
#4 ye.mdy926604 4 years ago

Attache

Attachments
Was this helpful?Yes0 No0
How can we improve it?
#5 kelvin.ng5186 4 years ago

Hi, there is few possibility.

  1. clean the encoder strip and sensor and also clean the ph contact point allocate on ph and carriage flex, after clean test again. if still same problem proceed to NO2.
  2. replace the SRK and trailing cable .

Was this helpful?Yes1 No0
100% of users thought this content was helpful.
How can we improve it?
#6 ye.mdy926604 4 years ago

Thank u souch. I'm from myanmar and Gandamar bussiness solution. I found error of this problem. That's your guideline for me. Thank you for your kindness

Was this helpful?Yes0 No0
How can we improve it?
#7 kelvin.ng5186 4 years ago

oh Gandamar, we may meet before. i'm the one who conduct the training to your service team few years back. cheers.

Was this helpful?Yes1 No0
100% of users thought this content was helpful.
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

New comments are not available at this time

Latest conversations HP Latex

Loading...

HP Latex Blog

Loading...

How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.