Cancel search

Single sheet printing on hp 115 latex

#1 finpai5758 4 years ago

I have been asked to print on pre-cut photographic paper 17 inches x 22 inches. Can this been done?

#2 HP-Sonia 4 years ago

The normal minimum substrate width is 23 inches (584 mm). To load substrates down to a minimum width of 10 inches (254 mm), go to the front panel and press Settings, then Substrate > Substrate handling options > Enable narrow substrate. With this option, print quality is not guaranteed.

Another point to keep in mind will be the lack of back tension as the substrate will not be attached to the input spindle. This can also affect quality. The length may also be too short to properly load the sheet. You should test this but the printer is not made for this type of printing so quality or functionality is not guaranteed.

Was this helpful?Yes0 No0
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

To make recommendations or participate please Sign In and post a message.

Latest conversations HP Latex


HP Latex Blog


How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.