Cancel search

Blurred image/Color Powdery look

#1 copyshipresources5169 5 years ago

I have an HP Latex 360 and no matter what substrate I print on, the colors have a hazy, powdery finish to them. Is there an easy fix to this?

#2 HP-Sonia 5 years ago

Hello! I know is going to be challeging but can you take a picture of what you are experiencing on your artwork?

Was this helpful?Yes0 No0
How can we improve it?
#3 copyshipresources5169 5 years ago

#2 Here is one picture. I have more my shop I can send. It appears to be a bleed problem and the red colors have a yellow haze on the bleed.

Attachments
Was this helpful?Yes0 No0
How can we improve it?
#4 HP-Sonia 5 years ago

#3 Looks like this could be a combination of printhead life, printhead alignment and media profile settings. So, I suggest you to:

  • Check the printhead life and replace if needed.
  • Make sure that the printheads are aligned and the media profile selected is the one for the media being used.
  • Besides, recheck the RIP settings are correct (test rotating the image 90º).

Lets us know if you have solved the issue!

Was this helpful?Yes0 No0
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

New comments are not available at this time

Latest conversations HP Latex

Loading...

HP Latex Blog

Loading...

How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.