Cancel search

HP latex 360 Curing temp and vacuum guide

HP Latex 300 Series

#1 Pixel 4 years ago

I am printing on a 200gsm Satin Photo paper and have bee recommended settings by our resellers technician. However we are getting smearing on the paper from the head passing over and also bucking of the paper also causing it to hit the top of the dryer also causing marks. The recommendation was for default vacuum of 20, 16p and curing temp of 90. I was previously using a vacuum of 60, 10p and temp of 70 to try and avoid the buckling which got better results. Would love to know if there is a guide for optimal settings for this and other papers

Thanks in advance!

#2 HP-Sonia 4 years ago

Hello I recommend going to and search for Satin Photo paper. You can download the profile from there. I hope this helps to get the appropriate setting for your print.

Was this helpful?Yes0 No0
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

To make recommendations or participate please Sign In and post a message.

Latest conversations HP Latex


HP Latex Blog


How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.