Cancel search

HP Latex Inks and print durability

HP-MarcM 28th of October 2014

The design of wide-format applications requires a good understanding of substrate options, printer and ink capabilities, as well as finishing and display techniques. One key aspect to be considered is the durability of the prints... How long will they last? Will they resist the “wear and tear” to which the application will be subjected? Is lamination required, or will the application be robust enough without lamination?

Of course, wide-format prints are used for an extremely wide range of applications and the sources of potential damage can vary significantly between applications. Vehicle graphics, for example, may be exposed for many months in outdoor locations, and will be subjected to the damaging UV rays in sunlight, regular washing, and occasional vehicle fuel spills durability requirements in this case are very high. At the other extreme, some event graphics and signs may only be required for a few days. Durability requirements in this case are relatively low in fact, the question in this case is whether lamination is required at all.

This guide provides: 

  • An understanding of the different components of durability, and which components should be considered in different environments.
  • Results from tests conducted on prints produced with HP Latex Inks for each of these different components.
  • Recommendations to print service providers (PSPs) when producing wide-format applications with HP Latex Inks.
  • Details of application warranties available from media manufacturers.

 Click on the attached file below to access the full guide.

Related posts


How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.